Hanging a mirror on drywall

STAS drywallxpress with mirror

Hanging a heavy mirror can be tricky. After all, you wouldn't dare thinking that your new mirror falls onto the ground in 10000 pieces in the middle of the night, right?! But then how do you mount a (heavy) mirror in a beautiful, safe and invisible way on drywall?


With the STAS drywallXpress!


  • No tools needed, press the drywall clip in the wall with your hands
  • • Hang multiple mirrors or other wall decoration with the picture rail
  • • Supported weight: 44 lbs per 39.25" of rail
  • • Enjoy the freedom to rearrange your wall decoration whenever you like!


PUSH, CLICK & GO! With the STAS drywallXpress you can mount a mirror hanging system on drywall in no time. No need to pick up that drill because you only need your hands to assemble this system. Click the rail onto the clips and your mirror hanging system is already hanging! STAS drywallXpress is a complete mirror hanging system consisting of 7 drywall clips, 78.75 inch of rail, two end caps, a rail connector and an auxiliary tool. Finish your mirror hanging system with matching cord and hook combinations.



Discover in this video how this mirror hanging system works:



STAS drywallXpress

How to hang a mirror on a wall without nails

Are you looking for a way to hang a (heavy) mirror but still in doubt of where and how to hang it? Afraid you'll regret your decision right after you put nails in your wall? The STAS drywallXpress! gives you the freedom to be as indecisive as you want, without damaging your wall!

STEP 1: Press the drywall clips in your drywall...
STEP 2: Click the rail onto the drywall clips...
STEP 3: Use the STAS hook and cord combinations to hang your mirror
STEP 4 - 10: Above the couch? Or... above the dinner table? A little to the right...
Just a little to the left... THAT'S IT! With the STAS drywallXpress you can redecorate whenever you like and as often as you like!

No stress with the STAS drywallXpress!


STAS drywallXpress

STAS self adhesive hangers



Mirror hanging hardware

Looking for some mirror hanging hardware? The STAS self adhesive hangers are a perfect solution. The flat steel plates, with strong thin foam adhesive, are applied to the back of the mirror and can carry up to a maximum of 13 lbs. Before applying the self adhesive hanger make sure the surface is clean and grease-free for the best result.

Combine the STAS self adhesive hangers with the STAS hook and cord combinations and hang them from the STAS drywallXpress for flexible hanging.


Hanging a heavy mirror with STAS drywallXpress

How to hang a heavy mirror on a plaster wall

The STAS drywallXpress itself has a weight limit of an amazing 44 lbs! You have a mirror that is heavier than 13 lbs (6 kg)? No problem! You can mount multiple STAS self adhesive hangers next to each other to increase the carrying capacity. A heavier mirror can be easily hung with 2 large STAS self adhesive hangers next to each other. It is of course important that you keep an eye on the maximum carrying capacity of the hook-cord combinations and the weight limit of the STAS drywallXpress (44 lbs per 39.25" of rail ).

Combine the STAS self adhesive hangers with the STAS hook and cord combinations and hang them from the STAS drywallXpress for flexible hanging. Always keep in mind though, that the STAS hook and cord combinations have their own maximum weight capacity. There are combinations of hooks and cords for loads up to 8.8 lbs, 22 lbs, 33 lbs and 44lbs per set to pick from. It's better to use two or more cord-hook combinations for the larger frames, so the weight capacity is certainly enough, plus you can level the frame better when you have two hook - cord combinations to hang your artwork on.

STAS drywallXpress